Electric Fuel Pump Install

1. Remove stock mechanical pump and gasket

2. Make Blank panel by aluminum plate. And make gasket by paper.

3. Fit gasket and blank panel with two bolts (D: 6mm x L: 20mm)

4. Prepare Electric pump and Fuel pressure regulator (Ex. holley)

5. Prepare Fuel hose ( dia.= 6mm for fuel filter or Carbs, ?mm for pump or regulator)

6. Put Electric pump with stay above left side engine mount bolt

7. Fuel press. regulator put on somewhere.

8. put relay and fuse for pump.

9. Set fuel pressure to 0.18 kg/cm2 (For Stock and Keihin CV carbs)